概述

       FJX亚型系列蒸发强制循环泵，是我公司FJX型系列循环泵的第三代产品。

       本公司自1984年开始研制烧碱蒸发强制循环泵至今:

       应用领域已由原烧碱蒸发扩展到:磷铵、磷酸、真空制盐、酒精、乳酸、氧化铝、金红石、钛白粉、氯化钙、氯化铵、制冷剂、熔盐、聚氯乙烯、废酸浓缩等行业。

       本公司是原化工部生产蒸发强制循环泵定点单位。

       公司FJXⅢ型系列强制循环泵是在第二代产品基础上借鉴国外同类产品的优点，并征求了专业设计院长期从事蒸发设计的工程技术，人员意见,而开发研制的。

       FJXⅢ型系列在安装形式上有:安装于地面、悬挂、池面漂浮三种形式。

       密封结构:双填料密封，副叶轮+组合式双端面机械密封，组合式双端面机械密封。

       性能参数:

       流量范围:300~ 23000m³/h

       扬程范围:2- 12m

       工作压力:≤0.6MPa

       工作温度:≤170℃

       泵体结构:

       铸造或钢板焊接。

       过流部分材料:

       ZG20#、1Cr18Ni9Ti、316.316L.CD4MCu

型号说明
       Explanation to Code of Pump

Biref Introduction

       The FJX H type series evaporates compulsory circulatepump, is my corporation FJX type series circulating pump ofthree generations product.

       Our company starts researching to manufacture from1984 the caustic soda evaporates compulsory circulate pumpthe. until now:

       The applied realm hases been evaporated by originalcaustic soda to expand to: Pbosphoric Ammonium, phosphoric acid, vacuum system salt, alcohol, lactic acid, oxidize thealuminum evaporate to wait the profession.

       Our company is the original chemical engineering department produce evaporate compulsory circulate pump thefixedpoint unit.

       The company FJX Ⅲ type series circulates to pumpcompulsory to draw lessons from the advantage of theabroad of the same kind product on the next generationproduct foundation, and asded for the profession design en-gineering technical personnel' s opinion that derector' s peri-od be engaged in the evaporation the design, but the development researches to manufactureof .

       FJX Ⅲ type series at install the formality have: Installthe forground,hang , the pond is afloat three dkinds of forms.

       Seal completely the construction :Vice-leaf s round+ thesectional double carries the machine seals completely, the seo-tional double arries the machine seals completely.

       Function parameter:

       Discharge scope:300~ 23000m³/h

       Head scope :2~ 12m

       Work pressure: <0.6MPa

       Work temperature:170℃

       Pump construction:

       Cast or steel plate jointing system

       Over flow the parts of material:

       ZG20# 1Cr18Ni9Ti, 316, 316L s CD4MCu

       Meaning of model code

       250 Impeller nominal diameter(mm)

       II - Three generations product

       FJX - Evaporate compulsory circulate pump

FJX型泵性能参数表  FJX Type pump Table of Performance

   订货注意:性能表上每一产品型号为-种外形尺寸,基础尺寸,但叶轮不同,务请在订货时,不仅写型号同时写明流量、扬程、介质特性。

       Order the atention: On the function form each product model number is a kind of shape size, foundation size, but leaf' s round isdif-ferent, for god' s sake pleases while ordering, not only write the model number to write the clear discharge, the distance of head thequality characteristic at the same time.